Embedded Works MP2A Interface Adapter

Description

• Accessory Type: Interface Adapter
• Connector:
• Cable Type:
• Cable Length:
• Operation Voltage:

MP2A Mini PCI-E to PCI-E adapter for WiFi/Cellular with integrated SIM holder

Introduction:
The MP2A passive adapter is designed for desktop PCs that convert Mini-Card to USB port or standard PCI-Express 1x slot.
You can insert your USB type minicard to this adapter then plug to USB port through USB cable.
Or insert your PCI-E type mini-card into this adapter then insert to PCI-E 1x connector . This uses SMA connectors which are common on Cellular modems..

Features:

• PCI Express Mini Card to PCI express 1x converter.
• Allows user to test PCI Express Mini modules on the PCI Express slot.
• Integrated SIM connector
• Supports two primary system bus interface: PCI Express and USB.
• Supports all of Mini-Cards such as 3G,CDMA, WLAN,WWLAN, Mini Card to desktop PC.
• Supports U.FL/IPX to RP- SMA pigtail WiFi RF cable adapter. (Optional)

Notice:
There are existing mPCIe “”form factor”” SSD’s that present SATA and PATA interface, but none that use the standard mPCIe pinout (i.e. mPCIe tx/rx pins).
MP2A support standard mPCIe minicard. Can’t support custom SATA/PATA SSD minicard.

Specification:

• PCI Express Mini Card to PCI Express/USB adapter.
• PCI Express Mini Card Electromechanical Specification Revision 1.2
• PCI Express Card Electromechanical Specification 1.1
• Universal Serial Bus Specification Revision 2.0
• Standard Height PCI Express Add-in Card.
• Low Profile PCI Express Add-in Card.
• Full/ Half -Mini Card dimension.
• SIM Connector for CDMA HSDPA/HSUPA, UMTS, GSM, GPRS, EDGE
• Wireless Disable/Enable switch
• WPAN, WLAN, WWAN, VCC3, VCC5, VCCaux LEDs